Loading... Please wait...
 

Our Newsletter


Dew Point Transmitter

Image 1
  • Image 1
Price:
Call for Quote
SKU:
Michell - Easydew Transmitter
Brand:
Michell Instruments

Product Description

he Easidew Transmitter is designed for ease of use, with all the features you want to make installation and operation as simple as possible. For the first time, dew point measurement is made as accessible as temperature and pressure measurement with this fully configured, calibrated transmitter. Easidew can be quickly incorporated into your air or gas management and control system since it is easy to install and operate. The costs of installation and operation are minimal due to the ruggedness, simplicity and reliability of the transmitter. The required periodic recertification to maintain your traceability is as easy and simple as the operation of the transmitter when using Michell's unique Calibration Exchange Program.

Product Features

  • 2-wire loop powered connection
  • Dew point or ppmv moisture content
  • NEMA 4X (IP66)
  • Excellent sensor protection
  • Measurement range -150 to +70°F
  • Operating temperature -40 to +140°F
  • Fast response
Easidew Transmitter

Technical Specification
GENERAL
Sensor Type Michell Advanced Ceramic Moisture Sensor
Calibration Range Calibrated from -150 to +70°F dew point
Power 12-28 VDC loop powered (by customer)
Output 4-20 mA current loop powered, configurable to include the entire range
Dew Point -150 to + 70°F (-100 to + 20°C) or ppmv 0 - 3000 ppmv output or non-standard dew point range must be specified at time of order
Accuracy ±3.6°F dew point
Operating Temperature -40 to +140°F
Temperature Effects Temperature compensated across operating temperature range
Operating Pressure 6500 psig (max)
Flow Rate 0-10 SCFH when mounted in an Easidew Sample Block
Interchangeability Fully interchangeable transmitters
Sensor Protection <10 µ HDPE Guard (std.), 80 µ SS
Sintered guard (optional)
Enclosure Rating NEMA 4X
Weight 0.33 lbs
Fault Conditions Condition Output (Factory programmed) Sensor fault 23 mA Under-range dew point 4 mA Over-range dew point 20 mA
Easidew Transmitter Part Numbers
Standard Transmitter: EA2-TX
Non Standard Range: EA2-TX-w/xyz
w = Zero value
x = Full scale value
y = Units (F = °F dp, C = °C dp, & P = ppmv)
z = Pressure for ppmv conversion in BarG. Blank = 0 BarG
PANEL METER - An economical panel or bench-mounted meter with digital display, analog outputs and dual alarm relays. Display and output configurable as dew point (°F or °C) or ppmv moisture content
- Part number: EA2-OL-100
Easidew Sampler - A self-contained sampling system, with filtration and flow control, for measurement of pressure or atmospheric dew point
- Part number: EA2-SAM
Sample Block - Stainless Steel sample block to contain Easidew Transmitter, with 1/8 NPT ports - Part number: CSB Replacement HDPE Guard - Pack of 10 HDPE Guards
- Part number: EA2-HDPE-10
Sintered Guard - Stainless Steel sintered guard, for protection of ceramic sensor (in place of standard HDPE Guard)
- Part number: 9980237
Easidew Communication Kit - for connection to Easidew Transmitter for reconfiguration of range and output via Michell Configuration Software (available free of charge from www.michell.com)
- Part number: EA2-CK

Find Similar Products by Category

You Recently Viewed...

Testimonials

To Ponder