Loading... Please wait...
 

NEWSLETTER


Testimonials

To Ponder

Terms of Use

ATTENTION: CAREFULLY READ THESE TERMS OF USE BEFORE USING THIS WEBSITE. YOUR ACCESS TO, AND USE OF, THE WEBSITE AND ITS MATERIALS IS CONDITIONED UPON YOUR ACCEPTANCE AND COMPLIANCE WITH THESE TERMS IN FULL. IF YOU DO NOT ACCEPT THESE TERMS, YOU SHOULD LEAVE THE WEBSITE IMMEDIATELY AND CEASE ANY FURTHER USE OF ANY MATERIALS YOU HAVE OBTAINED FROM THE WEBSITE.

1. Disclaimers and Limitation of Liability 

THE INFORMATION CONTAINED IN THIS WEBSITE IS PROVIDED TO YOU "AS IS," FOR YOUR INTERNAL INFORMATIONAL PURPOSES ONLY, WITHOUT ANY REPRESENTATION OR WARRANTY OF ACCURACY OR COMPLETENESS OF INFORMATION OR OTHER WARRANTY OF ANY KIND, INCLUDING ANY IMPLIED WARRANTY OF QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT WILL CLIPPER CONTROLS BE LIABLE TO ANY PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES FOR USE OF THIS WEBSITE OR RELIANCE UPON ANY INFORMATION OR MATERIAL ACCESSED VIA IT OR ANY OTHER HYPERLINKED WEBSITE INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING FROM LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, EVEN IF CLIPPER CONTROLS IS EXPRESSLY ADVISED ABOUT THE POSSIBILITY OF SUCH DAMAGES, TO THE FULLEST EXTENT ALLOWABLE BY LAW. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES AND REPRESENTATIONS, SO THE ABOVE EXCLUSIONS MAY NOT APPLY TO YOU.

The material on this Website could contain technical inaccuracies or typographical errors, and information will be changed, updated and deleted without notice. Clipper Controls may make improvements and/or changes in the products and/or the programs described in this material at any time. Clipper Controls makes no warranties that this Website will operate uninterrupted or error free or that defects will be corrected. Clipper Controls does not warrant that this Website is compatible with your computer equipment or that this Website or its server is free of errors or viruses, worms or "Trojan horses" and Clipper Controls is not liable for any damage you may suffer as a result of such destructive features.

This Website contains only a general description of the products shown. While uses and performance capabilities are described, under no circumstances shall untrained or unqualified individuals use the products and not until the product instructions including any warnings or cautions provided have been thoroughly read and understood. Only they contain the complete and detailed information concerning proper use and care of these products.

2. Third-Party Sites.

Clipper Controls makes no representations or warranties whatsoever about any other Website which you may choose to access through this Website. Links provided by Clipper Controls to such Websites are provided solely for your convenience and should not be deemed to imply that Clipper Controls endorses those Websites or any content therein.

3. Copyrights and Usage of Content.

The design, layout, and other rights to the materials on this Website are owned by Clipper Controls Inc., and are protected by trade dress, trademark, unfair competition, and other laws and may not be copied or imitated in whole or in part. You are authorized to view, download and reproduce the materials at this Website only for your internal information provided that you (a) retain all notices contained in the original materials (b) use images only with surrounding text relating to the images, and (c) include the following copyright notice:

© Clipper Controls Inc. All rights reserved.

No further publication or commercial use may be made of the materials on this Website without the express written permission of Clipper Controls.

4. Other Terms and Notices May Apply.

Additional terms and conditions will apply to business transactions conducted or any promotions run by Clipper Controls via this Website. Solely Clipper Controls’ or the appropriate manufacturer’s Terms and Condition of Sale under which such products and services are sold govern clipper Controls’ obligations and responsibilities regarding its products and services. Nothing contained in this Legal Terms & Notices Page is intended to modify or amend any agreement currently in effect between you and Clipper Controls.


Although these terms of use are intended to apply generally to all content located under clippercontrols.com, this Website may contain other proprietary notices and conditions of use, the terms of which must also be observed and followed as they apply to the particular portions of this Website for which they are intended.

5. Other Intellectual Property Rights.

Please note that any product, process or technology described in the materials on this Website may be the subject of other intellectual property rights reserved by Clipper Controls and are not licensed hereunder. The Clipper Controls logo, and "Control Solutions for Industry" along with most other brand names in this Website are the trademarks of Clipper Controls. Trademarks of other parties are identified by initial capitals wherever possible and Clipper Controls acknowledges their rights.

6. Communication.

Any communication you send to this Website or otherwise to Clipper Controls by any means will be treated as non-confidential and non-proprietary, and maybe disseminated or used by Clipper Controls or its affiliates for any purpose whatsoever. Notwithstanding the foregoing, all personal data provided to Clipper Controls online, will be handled in accordance with our Privacy Statement. You are prohibited from posting or transmitting to or from this Website any unlawful. Threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic, or profane material, or any other material that could give rise to any civil or criminal liability under the law. The sender of communications to this Website or otherwise to Clipper Controls shall be responsible for the content and information contained therein, including its truthfulness and accuracy.

7. Privacy Statement.

Clipper Controls is firmly committed to protecting individual privacy. The following discloses our information gathering and dissemination practices for this website:

When you visit our Website, we collect certain routing information such as the Internet Protocol address of your originating Internet Service Provider, and limited information provided by "cookies" stored on your hard drive. Clipper Controls uses this information to help diagnose problems with our server, to administer our Website, and to provide you with a better experience using our Website. Clipper Controls collects and maintains statistics about the Web servers used to contact us, which help us track the total number of visitors to the site and to specific parts of the site. These statistics are used to better serve our customers, and do not include personal information about individual visitors.

We do not collect personal information about visitors to this Website unless it is provided voluntarily. Children are not eligible to use our services and we ask that minors (under the age of 18) do not submit any personal information to us. Some of our site information forms enable you to request information, products, and services and request that you provide us with your e-mail address, phone number, address and other information in order to process your request. We will use this information to respond to your request and may provide such information we collect about you and your company to our affiliates and to third parties, including, but not limited to manufacturers, suppliers, or others involved in the distribution chain to provide the products or services that have been requested. We may also use the information for marketing for Clipper Controls and its affiliates; however, your personal information will not be given or sold to any outside organization for its use in marketing or solicitation not involving Clipper Controls or its affiliates.

We may disclose information about you or your company if we have a good faith belief that we are required to do so by law or legal process, to respond to claims, or to protect the rights, property or safety of Clipper Controls or others.

For your convenience, this Website contains links to other Websites. This privacy statement does not cover the information gathering and dissemination practices of those Websites. Clipper Controls is not responsible for the privacy practices or the content of such Websites. Please be aware that these web sites may collect personally identifiable information about you. Each Website should be checked for its own privacy statement.
If you wish to change or modify information previously submitted, or to request that Clipper Controls not use your personal information to contact you for marketing purposes you may use our Contact Us form. 

By using our Website, you consent to the collection and use of the information described herein by Clipper Controls. Please be advised that this policy may change from time to time with or without notice. By your continued use of this Website, you agree to be bound by any such revisions and should therefore periodically visit this page to determine Clipper Controls’ current privacy policy.

8. Access to Password Protected/Secure Areas.

 

Access to and use of Password Protected and Secure Areas of the Website is restricted to authorized users only. Unauthorized users attempting to access these areas of the Website are subject to prosecution.

9. Software License Agreement.

Any software that you download from this Website is governed in accordance with (a) the license terms that accompany the file or (b) if no license terms accompany the file, the terms of the license agreement that accompanied the original product licensed by you, which you are updating.

10. International users and Export Compliance.

You agree to use this Website for lawful purposes only and to comply with all applicable laws and regulations, including U.S. export and re-export control laws and regulations. If you access this site from outside the United States you are responsible for compliance with all applicable laws.

11. Contacting the Web Site.

If you have any questions about the practices of this Website, or your dealings with this Website, you can use the Contact Us form.


Return to top